|Year : 2020 | Volume
| Issue : 6 | Page : 766-770
|CBD-supplemented polishing powder enhances tooth polishing by inhibiting dental plaque bacteria
Kumar Vasudevan, Veronica Stahl
CannIBite bvba, Prins Leopoldlei 12, Mortsel 2640, Belgium
|Date of Submission||13-Aug-2020|
|Date of Decision||16-Sep-2020|
|Date of Acceptance||25-Sep-2020|
|Date of Web Publication||30-Oct-2020|
Dr. Veronica Stahl
CannIBite bvba, Prins Leopoldlei 12, Mortsel 2640
Source of Support: None, Conflict of Interest: None
| Abstract|| |
Objective: Air polishing is a safe tooth polishing technique used by dental professionals for stain and plaque removal and as a preventive procedure for dental health. We previously reported the antibacterial properties of cannabinoids against dental plaque bacteria. The objective of this study was to analyze the possibilities to improvise the existing air-polishing technique by supplementing cannabinoid powder into the classic polishing powder for effective removal of supragingival and subgingival plaque and for inhibition of plaque-forming bacteria. Materials and Methods: The cannabidiol (CBD) powder was added to the tooth polishing powder (AIR-N-GO, classic) at a 1% (wt/wt) ratio. The study was conducted on 12 patients, of whom six received regular polishing treatment and six received CBD-supplemented polishing treatment. The dental plaque samples were collected before and after each treatment and subjected to in vitro microbiological analysis, and the colony forming units (CFU) were analyzed by using an automated colony counter. Results: Based on in vitro microbiological analysis, the average CFU of interdental space samples collected from post-CBD-supplemented polishing treatment was significantly reduced (linear fold change between 3.9 and 18.4) compared with that of postregular polishing (linear fold change between 1.0 and 2.6) treatment. Conclusions: The CBD-supplemented polishing powder can help in effective removal and killing of dental plaque bacteria during the polishing treatment; it can also be added as an enhancing supplement to the existing polishing powders.
Keywords: Cannabinoid, CBD, dental care, dental plaque, polishing powder, tooth polish
|How to cite this article:|
Vasudevan K, Stahl V. CBD-supplemented polishing powder enhances tooth polishing by inhibiting dental plaque bacteria. J Int Soc Prevent Communit Dent 2020;10:766-70
|How to cite this URL:|
Vasudevan K, Stahl V. CBD-supplemented polishing powder enhances tooth polishing by inhibiting dental plaque bacteria. J Int Soc Prevent Communit Dent [serial online] 2020 [cited 2022 Jul 7];10:766-70. Available from: https://www.jispcd.org/text.asp?2020/10/6/766/299674
| Introduction|| |
Dental health problems, including dental plaque and staining, are common oral health problems affecting people of various age groups globally. Dental plaque is made of a complex biofilm of multiple species of microbes, and is an etiologic agent of dental caries and periodontal diseases. Dental health is influenced by various factors, including diet and lifestyle., Alcohols such as red wine and soft drinks such as tea, cola, and coffee can cause tooth staining and erosion.,, Apart from food-related tooth staining, smoking causes severe tooth staining. Tooth polishing is a dental procedure that is performed to remove the accumulated dental plaque and stains, to smooth the surface of the teeth, and to prevent dental problems. Tooth polishing involves removal of dental plaque, accumulated particles, and stains and the procedure reduces onset or development of dental problems due to untreated accumulation of dental plaque and also helps in aesthetics.
The air-polishing technique involves a polishing powder, water, and air applied under continuous, accurate, and controlled spray. This method is reported to be a safer and effective method, with several advantages over the other tooth polishing methods; however, it is not suitable for patients with health complications, including a sodium restricted diet and infectious diseases. The air-polishing method is reported to be effective in stain removal in smokers as well as nonsmokers. A scanning electron microscopy study revealed that the air-polishing method was able to more deeply clean without creating any damage to the enamel, contrary to polishing pastes (rubber cup method) that abrade the enamel surface. However, a comparative in vitro study on air polishing involving glycine and sodium bicarbonate powders has reported increased adhesion of S. mutans to the air-polished dentin by using sodium bicarbonate. Sodium bicarbonate, the commonly used powder for air polishing, is abrasive and can increase the surface roughness of teeth, thereby increasing the chances of bacterial adhesion and biofilm formation. An improvisation of the air-polishing technique is, therefore, required to reduce such risk of bacterial re-adhesion to the polished tooth surface. We recently reported the potential of cannabinoids in inhibiting the dental plaque associated with bacteria., In this study, we tested the effect of cannabidiol (CBD) on tooth polishing by supplementing the crystalline CBD powder with the regular air-polisher powder; here, we report the results of our finding based on in vitro microbiological analysis.
| Materials and Methods|| |
The study protocol was reviewed and approved by the Ethics Committee of the Institutional Review Board (AZ Groeninge Kortrijk, Belgium). The purpose of the study and procedure were explained orally to each participant. Oral and signed consent was obtained from each participant before sampling. A total of 12 adults (six women and six men), aged between 24 and 83, were recruited for this study. For convenience, the candidates were chosen from Euro-Dent clinic, Mortsel 2640, Belgium from among the clinic patients who were eligible (criteria described later) and agreed to participate in the study. The chosen 12 adults satisfied the following selection criteria for the study: (a) presence of a minimum number of teeth (seven), including one molar; (b) absence of dentures; (c) no recent history of antimicrobial therapy or other drug therapy, including being immunosuppressive; (d) no history of diabetes; (e) presence of dental plaque; and (f) not taking any special treatments for dental plaque in the recent past.
The CBD crystalline powder was added to the AIR-N-GO classic powder at 1% (wt/wt) and mixed well. The CBD-supplemented powder was loaded to the precleaned AIR-N-GO Easy polisher equipment, and the polishing procedure was performed by the standard method. For the control, the AIR-N-GO classic powder was directly used on a separate AIR-N-GO Easy polisher equipment to avoid any chances of CBD contamination.
Dental plaque sampling
Saliva on the tooth surface was removed by water spray before dental plaque sampling, and the sampling target area was dried with cotton. Using the disposable microbrush applicator, plaque samples were collected from interdental spaces and dispensed immediately into 1 ml of phosphate buffer saline (PBS) in a 2-ml microtube. For samples after polishing treatment (dental plaque removed), the sampling was performed at the same interdental space spot by using a disposable microbrush. All the samples were processed for the in vitro assay within 2 h from sampling.
The dental plaque sample was mixed on vortex, and the sample aliquot of 100 µl was spread on the surface of an LB agar plate by using a sterile spreader. An in vitro assay of each sample was performed in three replicates. The Petri dish More Detailses were sealed with parafilm and incubated for 36 h at 37°C in a temperature-controlled incubator. After incubation, the plates were analyzed by using an automated colony counter to compare the bacterial colonies. The colonies observed on in vitro culture plates represent total-culturable bacterial species (predominantly aerobic) present in the dental plaque samples. The automated colony counter was also used to highlight the colonies and to take pictures of plates. The colony forming unit (CFU) was calculated by the formula, CFU/mL = number of colonies per plate x 10.
The in vitro analysis of each sample was conducted in three replicates. The average values of total colony count were calculated [Table S1]. The average values were used to calculate the linear fold change and to represent them in figures. Student’s unpaired t-test was performed to compare the results before and after polishing treatment for test product (CBD-supplemented powder) and control product (AIR-N-GO classic powder), respectively, as well as to compare the results between test and control treatment [Table S2].
|Table S1: Colony count measurement data and comparative statistical analysis data|
Click here to view
| Results|| |
Tooth polishing by the air-polishing method using polishing powder supplemented with CBD (1%) resulted in a significant reduction of average CFU than that of regular powder, based on the in vitro microbiological analysis of samples from interdental space. There was a marginal difference in CFU between samples before and after air polishing with regular powder [Figure 1], [Figure 2], with a linear fold change in the range of 1.0–2.6 [Table S1]. However, a significantly higher reduction in CFU was observed between samples before and after air polishing with CBD-supplemented powder [Figure 1], [Figure 2], with a linear fold change in the range of 3.9–18.4 [Table S1]. In addition, we observed that some species of bacteria were completely absent in samples after CBD-supplemented polish treatment, as evident from the presence (before polish) and absence (after polish) of bacterial colonies with a distinct morphology [Figure S1], [Figure S2]. For example, in sample 4, some of the bacterial colonies with a distinct morphology (large, bright-white colonies) were observed before polish treatment, but they were completely absent after CBD-supplemented polish treatment and such prominent differences were not observed in control treatments [Figure S1], [Figure S2].
|Figure 1: Sample pictures of bacterial culture plates representing bacterial colonies (A) before vs after CBD-supplemented air polishing, (B) before vs after regular air polishing. The green color highlights are generated by using an automated colony counter, and each green mark represents a single bacterial colony detected by aCOLyte3|
Click here to view
|Figure 2: Graphical representation of CFU/mL data measured by using an automated colony counter. A, CBD-supplemented air polishing; B, regular air polishing|
Click here to view
|Figure S1: Bacterial culture plates of samples (1 to 6) before vs after CBD-supplemented air-polishing treatments. The green color highlights are generated by using automated colony counter aCOLyte3, and each green mark represents a single bacterial colony detected by aCOLyte3.|
Click here to view
|Figure S2: Bacterial culture plates of samples (7 to 12) before vs after regular air-polishing treatments. The green color highlights are generated by using automated colony counter aCOLyte3, and each green mark represents a single bacterial colony detected by aCOLyte3.|
Click here to view
Based on statistical analysis, the difference in CFU of samples before and after regular polishing treatment was not significant (p-value >0.5). On the contrary, the difference in CFU of samples was significantly higher (p-value <0.001) between before and after CBD-supplemented polishing treatment. The difference in CFU was also significant (p-value <0.05) for samples post-CBD-supplemented polishing in comparison to postregular polishing treatment [Table S2].
| Discussion|| |
Our results suggest that regular powder, although effective in removing the dental plaque, was not effective in inhibiting the plaque-forming bacteria. Although the chalk hard plaque was removed, there were still alive and active bacteria present in the treated tooth surface or interdental space as inferred by the in vitro bacterial culture results [Figures S1], [S2]. However, the addition of CBD powder appears to enhance the tooth-polishing process by inhibiting the plaque-forming bacteria as inferred by the significant reduction of CFU count on in vitro culture plates [Figures S1], [S2]. The results suggest that the addition of CBD to polishing powders might improve the tooth polishing treatments and might help to inhibit and reduce the rebinding ability of plaque-forming bacteria and the formation of new plaque.
The air-polishing technique is a safe and comfortable (for patients) treatment for tooth polishing without adverse effects on the enamel., However, the technique has a drawback of creating extensive aerosols that contain bacteria, blood, and saliva together with plaque and polishing powder particles from the patient., A recent study on microbial composition and spatial distribution of dental aerosols has reported the bacterial contamination of human origin and water origin and emphasized the importance of infection control measures in dental clinics, including the dental water line. Aerosols in dental clinic pose a potential threat to the dentist and dental assistants of various infections, including respiratory track infection such as pneumonic plague, TB, SARS, MERS, and COVID-19.,[18-20] Especially, with the present pandemic situation of COVID-19, dentists and dental assistants are at tremendous risk as the virus spread through droplets in air by oral, nasal, and eye mucus membranes., Several viral and bacterial infections can spread from patients to dentists and their team and eventually to other patients through cross-contamination from aerosols. It is essential, therefore, to upgrade the tooth polishing procedure to minimize aerosol-mediated infections, and it is feasible to achieve this by simple modification of polishing powders. Based on our previous reports, and this study results, CBD-supplemented powder has the potential to reduce the risk of aerosol-mediated infection by inhibiting the bacteria. Although the current study is limited to in vitro analysis, the results are significant and suggest a strong potential of cannabinoids in reducing the dental aerosol-mediated infections. However, this needs to be tested by an analysis of the aerosol samples collected from the close proximity of patients receiving CBD-supplemented polishing.
Air polishing was initially used for supragingival plaque removal; however, by substituting the powder with a low-abrasive powder such as glycine powder, the same technique is also applied for subgingival plaque removal without causing damage to the soft tissues., Similarly, in addition to CBD supplementation in the powder phase, a new liquid formulation with CBD infusion to replace water for the liquid phase in the air polisher can also be developed in future to further increase the inhibition of plaque-forming bacteria. The dental water line may have bacterial contamination; such liquid formulation with CBD might reduce the risk of such contaminants, further improve the subgingival and supragingival plaque removal, enhance the overall tooth polishing by inhibiting the bacteria, and finally, further reduce the risk of infections from the dental aerosols. The current study demonstrates a simple improvisation of the existing air-polishing technique and is easy to implement without any need for modification of the existing protocol. With the help of its anti-quorum sensing properties, and as demonstrated in this study, cannabinoids have the potential to enhance the overall performance of tooth polishing treatment.
CannIBite bvba/Veronica Stahl has pending patents (in process) for application of cannabinoids in dental care, personalization, and treatments.
Financial support and sponsorship
This work was funded by VLAIO Belgium/CannIBite bvba.
Conflicts of interest
Veronica Stahl is the founder of CannIBite bvba, which develops cannabinoid-infused dental care products. CannIBite bvba agreed to publish this study report.
VS contributed to the concept, performed the dental polishing and sampling. KV contributed to the experiment design, data acquisition, and interpretation; performed the in vitro experiments; and drafted and critically revised the article. All the authors read and approved the final article.
Ethics approval and consent to participate
Ethical approval date of issue 17.04.2018; Institute name, AZ Groeninge Kortrijk, Belgium; issued approval B39S201836215, AZGS2018028; letter reference Nr. 18030. The study protocol was reviewed and cleared by the Ethics Committee of the Institutional Review Board (AZ Groeninge Kortrijk; Belgium). The study protocol and the purpose were explained orally to the participants. Oral and signed consent from each participant was obtained before the start of the study.
Consent for publication
The contribution of Euro-Dent BV in this study was only limited to dental plaque sampling, which also involves the procedure of ethics approval and patients’ consent to participate in the study. CannIBite bvba is the sole contributor for the development of cannabinoid-supplemented tooth polishing, for the conduct of experiments, data analysis, and article preparation. Consent to publication was agreed by all authors. Consent to publication was agreed by CannIBite bvba and Euro-Dent BV.
Data availability statement
Additional data are available as supplementary items. Any further details on results, data, and methods can be requested directly by the corresponding author.
| References|| |
Rosan B, Lamont RJ. Dental plaque formation. Microbes Infect 2000;2:1599-607.
Scardina GA, Messina P. Good oral health and diet. J Biomed Biotechnol 2012;2012:720692.
Hasselkvist A, Johansson A, Johansson AK. Association between soft drink consumption, oral health and some lifestyle factors in Swedish adolescents. Acta Odontol Scand 2014;72: 1039-46.
Manno SHC, Manno FAM, Ahmed I, Ahmed R, Shu L, Li L, et al
. Spectroscopic examination of enamel staining by coffee indicates dentin erosion by sequestration of elements. Talanta 2018;189:550-9.
Grocock R. The relevance of alcohol to dental practice. Br Dent J 2018;223:895-9.
Karadas M, Seven N. The effect of different drinks on tooth color after home bleaching. Eur J Dent 2014;8: 249-53. [Full text]
Alkhatib MN, Holt RD, Bedi R. Smoking and tooth discolouration: Findings from a national cross-sectional study. BMC Public Health 2005;5:27.
Sawai MA, Bhardwaj A, Jafri Z, Sultan N, Daing A. Tooth polishing: The current status. J Indian Soc Periodontol 2015;19: 375-80.
] [Full text]
Graumann SJ, Sensat ML, Stoltenberg JL. Air polishing: A review of current literature. J Dent Hyg 2013;87:173-80.
Hongsathavij R, Kuphasuk Y, Rattanasuwan K. Clinical comparison of the stain removal efficacy of two air polishing powders. Eur J Dent 2017;11:370-5.
] [Full text]
Camboni S, Donnet M. Tooth surface comparison after air polishing and rubber cup: A scanning electron microscopy study. J Clin Dent 2016;27:13-8.
Tada K, Oda H, Inatomi M, Sato S. Characterization and streptococcus mutans adhesion on air polishing dentin. Odontology 2014;102:284-9.
Janiszewska-Olszowska J, Drozdzik A, Tandecka K, Grocholewicz K. Effect of air-polishing on surface roughness of composite dental restorative material - comparison of three different air-polishing powders. BMC Oral Health 2020;20:30.
Stahl V, Vasudevan K. Comparison of efficacy of cannabinoids versus commercial oral care products in reducing bacterial content from dental plaque: A preliminary observation. Cureus 2020;12:e6809.
Vasudevan K, Stahl V. Cannabinoids infused mouthwash products are as effective as chlorhexidine on inhibition of total-culturable bacterial content in dental plaque samples. J Cannabis Res 2020;2:20.
Harrel SK, Molinari J. Aerosols and splatter in dentistry: A brief review of the literature and infection control implications. J Am Dent Assoc 2004;135:429-37.
Zemouri C, Volgenant CMC, Buijs MJ, Crielaard W, Rosema NAM, Brandt BW, et al
. Dental aerosols: Microbial composition and spatial distribution. J Oral Microbiol 2020;12:1762040.
Ge ZY, Yang LM, Xia JJ, Fu XH, Zhang YZ. Possible aerosol transmission of COVID-19 and special precautions in dentistry. J Zhejiang Univ Sci B 2020;21:361-8.
Bizzoca ME, Campisi G, Muzio LL. Covid-19 pandemic: What changes for dentists and oral medicine experts? A narrative review and novel approaches to infection containment. Int J Environ Res Public Health2020;17:3793.
Peng X, Xu X, Li Y, Cheng L, Zhou X, Ren B. Transmission routes of 2019-nCoV and controls in dental practice. Int J Oral Sci 2020;12:1-6.
Soni D, Smoum R, Breuer A, Mechoulam R, Steinberg D. Effect of the synthetic cannabinoid HU-210 on quorum sensing and on the production of quorum sensing-mediated virulence factors by vibrio harveyi. BMC Microbiol 2015;15:159.
[Figure 1], [Figure 2], [Figure 3], [Figure 4]
[Table 1], [Table 2]
| Article Access Statistics|
| Viewed||2323 |
| Printed||38 |
| Emailed||0 |
| PDF Downloaded||80 |
| Comments ||[Add] |